How to choose the positioning datum in the process of machining parts of the machining center

Release time:

2021-05-18

In the process of machining the workpiece, the selection of the positioning reference of the CNC machining center determines the quality of the part, whether it can ensure the dimensional accuracy and mutual position accuracy of the parts, and the arrangement of the processing sequence between the surfaces of the parts. Great influence, when using fixtures to install the workpiece, the choice of positioning datum will also affect the complexity of the fixture structure. This requires that the fixture can not only withstand large cutting forces, but also meet the positioning accuracy requirements. Therefore, the choice of positioning datum is a very important process issue. So how do we choose the positioning datum when machining parts with a CNC machining center? Here is a brief introduction:

1. The selected datum should be able to ensure accurate positioning of the workpiece, convenient for loading and unloading the workpiece, positioning and clamping of the workpiece can be completed quickly, the clamping is reliable, and the fixture structure is simple.

2. The reference selected by the CNC machining center and the dimensions of each processing part are simple to calculate, minimize the calculation of the dimensional chain, and avoid or reduce the calculation links and calculation errors.

3, to ensure the accuracy of various processing. When determining the positioning datum of the parts, the following principles should be followed:

1) The origin of the workpiece coordinate system, that is, the "programming zero point", and the part positioning datum do not necessarily have to coincide, but there must be a definite geometric relationship between the two. The main consideration for the selection of the origin of the workpiece coordinate system is to facilitate programming and measurement. For parts with high dimensional accuracy requirements, when determining the positioning reference, it should be considered whether the coordinate origin of the CNC machining center can be accurately measured by the positioning reference.

2) When both the machining datum and the processing of each station are completed on the CNC machining center, the selection of the positioning datum needs to consider the completion of as much processing content as possible. For this reason, it is necessary to consider a positioning method that facilitates all surfaces to be processed. For example, for a box, it is best to use a positioning method of two pins on one side to facilitate the processing of other surfaces by the tool.

3) Try to choose the design datum on the part as the positioning datum. This requires that in rough machining, consider what rough datum to use to machine each surface of the fine datum, that is, each positioning datum used on the CNC machining center should be processed in the previous ordinary machine tool or other machine tools, so that it is easy to ensure that each work The precision relationship between the machined surfaces.

4) When the positioning datum of the CNC machining center parts is difficult to coincide with the design datum, the assembly drawings should be carefully analyzed to determine the design function of the part design datum, and the geometric tolerance between the positioning datum and the design datum should be strictly specified through the calculation of the dimensional chain. Range to ensure machining accuracy.

5) When the station processing including the design datum cannot be completed on the CNC machining center at the same time, the positioning datum and the design datum should be overlapped as much as possible. At the same time, it must be considered that after positioning with this reference, all key precision parts can be processed in one clamping.