Safely operate the gantry milling machine and easily cope with emergencies!

Release time:

2021-05-18

Longmen milling machine, as everyone knows, the Longmen milling machine is a large-scale mechanical equipment, because it has the characteristics of high processing accuracy, fast efficiency, easy operation, etc., it is widely used to process all kinds of special parts and the inclined surface of large workpieces. Therefore, Nantong vertical and horizontal According to the "Equipment Safe Operation Process Regulations" and other related documents, the technicians standardize the processing of CNC gantry milling machines, so that they can easily deal with unexpected situations during the operation.

(1) Wear labor protection equipment as required before work, tie up the mouth, do not allow to wear towels, gloves, long hair that exceeds the base of the neck should be wrapped in a hat, and wear protective glasses when cutting.

(2) Before operation, check whether the equipment safety device and safety protection device are intact and complete, and whether the insulation is damaged.

(3) The work should be clamped with pressure plates, screws or special tools. No casing is allowed when using ordinary wrenches to avoid slipping and hurting people.

(4) The tool must be clamped firmly, otherwise it is not allowed to drive to work.

(5) Before working, check the operation of the rotating part of the machine tool, and install the baffle plate of the machine tool before it can operate.

(6) When milling various workpieces, especially rough milling, slow cutting should be performed.

(7) When moving the workbench and tens of thousands of frames, loosen the fixing screws first to prevent accidents.

(8) When loading and unloading knives, use a copper hammer or wooden awl to lightly hit them to prevent cutting tool fragments from flying out and hurting people.

(9) During cutting, it is not allowed to change speed and adjust the tool, and it is forbidden to touch or measure the workpiece by hand, and the human body, head and hand are not allowed to approach the tool.

Emergency measures

(1) In the event of mechanical injury, scalding and other injury accidents, temporary measures should be taken for first aid; if there may be internal injuries, make it fall smoothly on the ground without major movements, and send it to the hospital for treatment in time.

(2) In the event of a personal electric shock, the switch should be turned off immediately. After the electric shocker is disconnected from the power supply, manual first aid shall be given and sent to the hospital in time. When the electric shocked person is disconnected from the power supply and may fall, measures shall be taken to prevent fall injuries. .

(3) When equipment failure is found, the operation should be stopped immediately, the power supply should be turned off, and the operation can only be carried out after the problem is rectified.

(4) In the event of an equipment accident, promptly report to the team leader; in the event of a personal injury, immediately shut down and cut off the power supply, rescue the wounded, report to the leader, call the emergency call, and protect the scene. You must make a record, actively cooperate with the accident investigation, and must not lie or conceal the truth of the accident.

In short, the introduction is still a sentence, I hope everyone can standardize their operating procedures, avoid accidents, and improve the production efficiency of the enterprise.